Sennheiser ASA 1 antenna splitter

Sennheiser ASA 1 antenna splitter

The Sennheiser ASA 1 Active Antenna Splitter and Power Supply Kit from B&H consists of an ASA 1 active antenna splitter and a power supply. The ASA 1 is rack mountable and allows up to 4 EW series receivers to share a pair of antennas without signal attenuation.

Sennheiser ASA 1 Active Antenna Splitter

The Sennheiser ASA 1 Active Antenna Splitter is a rack mountable antenna splitter that allows for up to 4 EW receivers to share one pair of antennas without signal attenuation. If desired, 2 splitters can be linked to create an 8-channel system. This unit requires a NT 1-1 plug-in adapter (sold separately) for operation.

Rack mountable

Transmitters receive power via BNC cables eliminating the need for separate power supplies

Two ASA 1 Splitters can be linked together to create an 8-channel diversity system

Sennheiser ASA 1 Active Antenna Splitter

Connector Input: BNC x 8

Output: BNC x 2 (RF Out)

Frequency Range 500 to 870 MHz (-3 dB)

Operating Voltage 13.8 VDC (with NT 1-1 mains unit)

Current Consumption max 2.0 A with 4 receivers and 2 antenna boosters

Supply Voltage Supply Voltage of Antenna Booster at ANT RF In A and ANT RF In B: 12 V 130 mA

Supply Voltage of Receivers at A1 - A4: 12 V (protected from reverse feed), 350 mA

Relative Humidity 5 to 95%

Operating Temperature 14 to 131?F (-10 to +55?C)

Storage Temperature -4 to 158?F (-20 to +70?C)

Dimensions 8.35 x 6.61 x 1.69" (212 x 168 x 43 mm)

Weight 2.4 lb (1.09 kg)

Packaging Info

Box Dimensions (LxWxH) 9.9 x 8.6 x 3.2"

Sennheiser NT 1-1 US Power Supply for ASA 1

Power Requirements 120VAC

Packaging Info

Box Dimensions (LxWxH) 6.4 x 3.2 x 2.8"