ล้างเครื่องจักร กำจัดสนิม ทำความสะอาดเครื่องจักร

฿ไม่ระบุ
ชื่อผู้ประกาศ : ศิริรัตน์ ปลอดทุกข์

เบอร์โทรศัพท์ : 026370330

โทรศัพท์มือถือ : 0846777254

ที่อยู่ : 353/38 Soi Santiphap1 Sri Phraya Bangrak Bangkok

รายละเอียดสินค้า

บริษัท ไออาร์เอส อินเตอร์ เนชั่นแนล รีคัฟเวอร์รี่ เซอร์ วิสเซส จำกัด เป็นบริษัทจากประเทศออสเตรเลีย ซึ่งมีสาขาอยู่ในหลายประเทศ เช่น ออสเตรเลีย นิวซีแลนด์ สิงคโปร์ อินโดนีเซีย ไทย กรุงเทพ ภูเก็ต เป็นต้น เรามีช่าง พร้อมทีมงานผู้เชี่ยวชาญพร้อมที่จะเข้าไปดูหน้างานได้ตลอดเวลา

English version please read below .

รับทำความสะอาดด้วยน้ำแข็งแห้ง ทำความสะอาดโรงไฟฟ้า ทำความสะอาดและซ่อมแซม เครื่องจักร ทำความสะอาดโรงงาน ทำความสะอาดห้อง Data Center disaster recovery, technical consultancy, dry ice cleaning

dry ice blasting: dry ice blasting machines and accessories for a variety of industries and applications,

dry ice cleaning, by IRS International Recovery Services., Ltd

ทางเราขอเสนองานบริการทำความสะอาดแบบครบวงจรดังนี้

- ทำความสะอาดครั้งใหญ่ในโรงงาน โรงไฟฟ้า ทำความสะอาดห้อง ดาต้า เซ็นเตอร์ และทุกสถานที่ด้วยน้ำแข็งแห้ง และด้วยสารเคมีนำเข้าชนิดพิเศษ

- รับทำความสะอาดอาคารก่อสร้างของโรงงาน โรงไฟฟ้าก่อนส่งมอบงานให้ลูกค้า

- รับ ซ่อมแซมเครื่องจักรในโรงงาน เครื่องจักรทุกชนิด รับทำความสะอาดอาคารและสถานที่หลังเกิดเหตุไฟไหม้ น้ำท่วม

- รับล้าง ทำความสะอาดเครื่องจักรครั้งใหญ่ หลังจากการใช้งานมานาน

- รับ commissioning เครื่องจักรทุกชนิด ซ่อมเครื่องจักรทุกชนิดที่คิดว่าไม่มีบริษัทไหนซ่อมได้

- รับกำจัดสนิมทุกชนิด

- ทำความสะอาดวงจรไฟฟ้า

- ล้างฮูตในครัว

- ทำความสะอาด ท่อดักแอร์

- รับตรวจเช็ค เทอร์โม แสกน

และรับปรึกษาเกี่ยวกับงานด้านที่กล่าวมาข้างต้น

งานทำความสะอาดท่อดักแอร์ งาน ครัว ในโรงแรม สนามบิน

พร้อมไปดูหน้างานได้ทันที หรือโทรสอบถามข้อมูลเบื้องต้นได้เลยค่ะ

สามารถเข้าไปดูเวปไซค์ของเราได้ที่

www.international-recovery.com

Nutsita Thepbanchong

Marketing Executive

0818455585

353/38 Soi Santiphap 1, Sab Road, Sri Phraya, Bangrak Bangkok 10500

49/20 ม.1 ซอยรวมนานาชาติ ในหาน ตำบลราไวย์ อำเภอเมือง ภูเก็ต 83130

DRY ICE PRESSURE CLEANING

HOW IT WORKS

Dry ice pressure cleaning is a blast cleaning method that uses various sizes of dry ice pellets as the blast material. The process uses a combination of 3 energy sources to make it work.

The dry ice pellets are accelerated in a jet of compressed air similar to that used in traditional blasting methods generally know as kinetic energy.

When the dry ice pellets impact with the contaminates, a small thermal differential is established between the contaminant and the substrate and breaks the bond, know as thermal differentials.

As the dry ice impacts the surface being cleaned the pellets instantaneously turns form a solid back into its normal gaseous state. Dry ice is made from compressed carbon dioxide. The rapid expansion of the gas removes the contaminant. This know as molecular expansion.

BENEFITS

Since dry ice is made from a gas it does not contain any moisture, the contaminants that are removed remain dry generally leaving a light dust that can be easily vacuumed or even captured in filters while the job is on progress. Therefore there is little additional cleanup after the cleaning is completed.. This significantly reduces disposal costs and in some cases completely eliminated.

Also with the process being dry eliminates having to erect ovens and drying equipment for days to dry the windings. The process also reduces OH&S isues associated with the use of harmful chemicals and also the reduced the risk of injuries trying to clean difficult places.

There is rarely a need for disassembly and reassembly of equipment and with minimal cleanup, the required equipment downtime is very short. Due to the nature of the cleaning process due to the length and shape of the nozzles, it is access and thoroughly clean hard to reach places where human hands cannot or should not go.

Electrical equipment can be tested and re-energized as soon as the cleaning is completed. IRS have never had a reported failure from any switchboard that we have completed over the last 11 years.

Both job and long term costs are significantly lower than traditional methods.

CURRENT USES & BENEFITS OF DRY ICE CLEANING

? Generator windings and gas turbines for major power generation companies

? Ball mill motors, Drive motors and winder motors for major mining companies

? Electrical switchboards in Draglines, face shovels, control rooms, wash plants, stacker reclaimers, refineries. Frequent cleaning of draglines and shovels have shown a big drop in intermittent problems caused by dust particles that a normal blow down does not remove.

? Onsite cleaning using dry ice cleaning eliminates having to remove the item, eliminates any further damage that may be caused during transport to a major workshop for cleaning. Which in turn shortens an outage.

? CASE STUDY

? WINDER MOTOR

? Winder at an Australian major mine.

? Start stops per day 400

? Our value lifted per hour approx $200,000.00

? For 6 months @ 70% duty cycle

IR @1min start 380 meg

? Conventional cleaning methods

? Steam clean and erect dry in oven 7 to 10 days, estimated production loss $10 to $14 million

? Chemical clean 4 to 5 days estimated production loss $8 to $10 million

Cleaning with dry ice. Actual time to complete 10 hrs.

Day 1end 953

Day 2 start 1380 meg

Final test results

1 min. 994. 1.02 na

2. 1690

3. 2100

4. 2460

5. 2850

6. 3200

7. 3570

8. 3850

9. 4070

10. 4540.

Total lost production costs $2 million.

Problem with conventional cleaning is finding the time and the personnel to complete the project.

Ice cleaning requires 2 personnel.

USES IN POWER GENERATION & MINING

POWER GENERATION & MINING.

? GENERATOR STATOR WINDINGS & ROTORS

? EXCITERS

? BRUSHGEAR AND BRUSH ENCLOSURES

? GAS TURBINE ROTORS & STATORS

? Hv CIRCUIT BREAKERS & CONTACTS

? Hv CUBICLES, BUS BARS & BUS CHAMBERS

? TRANSFORMERS

? RESISTOR BANKS

? CONTROL CABINETS

SWITHYARDS INSULATORS

SUMMARY

? Saves time on shutdowns

? Shortens outages

? More cleaning can be achieved on a shutdown

? Equipment can be re energized as soon as cleaning is finished

? Minimal clean up and disposal

? Minimal OSHS issues

? No harmful chemicals used

? Onsite cleaning reduces any further equipment damage caused by transportation.

? Helps Extends the life of the equipment.

NOTE

? Before Using a contractor

? Check the experience and what they have done because it will damage your equipment in the hands of an unskilled operator.

Copy of CD presentation available on request

Thank you for your time.

Any questions please contact us.



กำจัดสนิมทุกชนิดล้างเครื่องจักร
สินค้าแนะนำ
บทความ