VM-3240E
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.
Specification
Power Source
230 V AC, 50/60 Hz
Power Consumption
600 W (with rated output signal), 260 W (according to EN60065)
Rated Output
240 W
Frequency Response
50 Hz - 20 kHz, ±3 dB (at 1/3 rated output)
Distortion
0.7 % or less (at rated output, 1 kHz)
S/N Ratio
85 dB or more
Input
External amplifier input: 100 V line, removable terminal block (14 pins)
Output
Speaker output 1 - 2: Max. (240 W) per outputSpeaker output 3 - 6: Max. (120 W) per outputSpeaker output 1 - 6: Total within 240 W, removable terminal block (14 pins)Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detectionDirect output: Direct output from internal or external amplifier,removable terminal block (16 pins)
VM Link
Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connectorOutput: Connecting the VM-3240E or VM-3360E, RJ45 female connectorMaximum distance: 800 m (874.89 yd)Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link
Connecting the VP-2241, RJ45 female connectorMaximum distance: 5 m (16.4 ft)Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control
Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,short-circuit current: 2 mA or less, removable terminal block (14 pins)Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,operating current: 10 mA or less, removable terminal block (14 pins)
Emergency Control
Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,short-circuit current: 2 mA or less, RJ45 female connectorInput 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,RJ45 female connectorStatus out: Relay contact output, withstand voltage: 40 V DC,operating current: 2 - 300 mA, RJ45 female connector
ATT Control
Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,removable terminal block (16 pins)
Power Input/Output
Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)PS out: 28 V DC/18 AM4 screw terminal, distance between barriers: 11 mm (0.43')
DC24V Output
24 V DC, Maximum feeding current 0.3 A
Ds Link
Connecting the VX-2000DS, RJ45 female connectorMaximum distance: 5 m (16.4 ft)Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Operating Temperature
-5
สนใจสินค้า ติดต่อ
ฝ่ายขาย สาขารังสิต
โทร :
0-2996-2636-9,082-450-0417-8
E-mail :
[email protected] ,
[email protected]
Line ID : cctvplaza1 , pathumdesign , salesps
Wechat : Pathumdesign
Facebook.com / Pathumdesign
เว็บไซต์ :
www.psitmart.com
www.pathumdesign.net
www.pathumdesign.com
www.cctvplaza1.com
www.cctvsquare.com
www.isystemsoftware.com
www.taradcctv.com
Tag : VM-3240E