MANOSTAR Differential Pressure Gauge WO70FV300D |
฿ไม่ระบุ |
|
ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd. เบอร์โทรศัพท์ : 0-2457-6470-3 โทรศัพท์มือถือ : 08-1923-5473 ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร การติดต่ออื่นๆ : www.kpbgroup.com ร้าน KPB Enterprise Co., Ltd. |
รายละเอียดสินค้า
MANOSTAR Micro Differential Pressure Gauge
Model : WO70FV300D
WO70 :- Series
F :- Surface Installation Type
V :- For Vinyl or Plastic Tube
300D :- Pressure Range Code
- Pressure Range : 0 ~ 300 Pa
- Pressure Measuring Method : Measuring Differential Pressure
- Pressure Receiving Element : Diaphragm
- Standard Installation Position : From Upward Horizontal to Vertical is Available
- Gases to be Measured : Air or Non-Corrosive Gases (No Liquid)
- Scale Indicating Angle : Approximately 90 Degree
- Medium and Ambient Temperature : -10 to 50 C (No Freezing)
- Ambient Humidity : 90 %RH of Less (No Dewing)
- Withstanding Pressure of Instrument Body : 50 kPa
- Material of the Outer Case : Polycarbonate and Polyamide
- Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration : 39 m/s2
- Withstanding Impact : 100 m/s2
- Applicable Piping : Vinyl or Plastic Tube or Rubber Tube (I.D. 6)
- Piping Connector Polarity : The piping Connector Indicated Red Color is High Pressure Side and Blue Color is Low Pressure Side
- Accuracy at 20 C : Up to +,-2.5% F.S.
- Material of Pressure Receiving Element : Silicone Rubber
- Withstanding Pressure of Receiving Element : 20 kPa
- Weight : Approximately 200 g.
Mfg. YAMAMOTO KEIKI MFG. CO., LTD.
Made in Japan
PressureYAMAMOTOMANOSTARGaugeWO70FV300D
Model : WO70FV300D
WO70 :- Series
F :- Surface Installation Type
V :- For Vinyl or Plastic Tube
300D :- Pressure Range Code
- Pressure Range : 0 ~ 300 Pa
- Pressure Measuring Method : Measuring Differential Pressure
- Pressure Receiving Element : Diaphragm
- Standard Installation Position : From Upward Horizontal to Vertical is Available
- Gases to be Measured : Air or Non-Corrosive Gases (No Liquid)
- Scale Indicating Angle : Approximately 90 Degree
- Medium and Ambient Temperature : -10 to 50 C (No Freezing)
- Ambient Humidity : 90 %RH of Less (No Dewing)
- Withstanding Pressure of Instrument Body : 50 kPa
- Material of the Outer Case : Polycarbonate and Polyamide
- Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration : 39 m/s2
- Withstanding Impact : 100 m/s2
- Applicable Piping : Vinyl or Plastic Tube or Rubber Tube (I.D. 6)
- Piping Connector Polarity : The piping Connector Indicated Red Color is High Pressure Side and Blue Color is Low Pressure Side
- Accuracy at 20 C : Up to +,-2.5% F.S.
- Material of Pressure Receiving Element : Silicone Rubber
- Withstanding Pressure of Receiving Element : 20 kPa
- Weight : Approximately 200 g.
Mfg. YAMAMOTO KEIKI MFG. CO., LTD.
Made in Japan
PressureYAMAMOTOMANOSTARGaugeWO70FV300D
